Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack)

See what our Experts say about this Master Lock Padlocks

• Lock Recommendation for a Bulldog BX1 Gooseneck Coupler
  The Bulldog BX1 gooseneck couplers have that handle assembly at the bottom so the # BLTL-50 would not fit. The BX1 series of gooseneck couplers can be locked with a padlock like the part # 141T. When the BX1 couplers are in the coupled position, you can place a padlock through the hole as indicated in the picture. The coupler could then not be opened with or without a trailer connected.
  view full answer...
  
• Locks Available for the Carpod Walled Cargo Carrier # M2200-01-02 on a 1999 GMC Safari
  The Carpod Walled Cargo Carrier with Lockable Lid and Cargo Bag # M2200-01-02 will work with the Master Lock Covered Solid Body Padlock # 141T. If you are looking for a hitch lock, I would recommend the Trailer Hitch Receiver Lock # e98880. I have included a video of the hitch lock for you to check out. Both locks are sold separately from the cargo carrier. You will need a 2 inch receiver to carry this cargo carrier on your 1999 GMC Safari. If you do not have a receiver, I recommend the...
  view full answer...
• Cargo Rack for 2019 Ram 1500 with Retrax XR Tonneau for Kayak and Cargo Carriers
  The Two Retrax XR manual tonneau covers that fit your 2019 Ram 1500 6-1/2-foot bed without Rambox are parts # RTT-80245 for the aluminum version and # RTT-60245 for the Lexan version. Both can use the Yakima JetStream Crossbar System # Y00427-482104 which features aluminum crossbars that install right in the Trax rail system you have. The 70-inch bars will give you plenty of space for both a cargo box and a kayak carrier and their quiet aerodynamic design includes built-in T-slot channels...
  view full answer...
  
• Is There a Locking Gun Case Storage Box Available for the 2016 Chevy Colorado
  I may have a solution for you, but DuHa does not make an underseat locking gun storage box for any mid size trucks like the 2016 Chevy Colorado. It's not going to be exactly what you're looking for but they do have 2 truck bed mounting options that you could use on your truck with the # DU70103 or the # DU70114 (same as the DU70103 but with mounting brackets). You would also need padlocks for these which you can get with the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter...
  view full answer...
• Recommended Convert-A-Ball Gooseneck Adapter For 5th Wheel
  The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall # CAB-C5GX1216 is a nice adapter that gives you 7-1/2 inches of offset. The adjustable height from 12-16 inches gives you more adjustability than most 5th wheel hitches. It has a towing capacity of 20,000 lbs and the interior polyurethane cushions act as shock absorbers to minimize bounce and vibration to protect both your truck and your trailer. If you don't need the offset, I recommend # CAB-C5G...
  view full answer...
• Cargo Basket Recommendation For 2014 Hyundai Santa Fe Limited With Panoramic Roof
  There are a couple of measurements you can take on your 2014 Hyundai Santa Fe. First, you will want to measure the crossbars themselves to make sure any basket you select will fit the style and size you have. The next important measurement is the distance center-to-center. You said your crossbars measured 43 inches, so that will be the measurement I use when making a recommendation. Unfortunately, the Rhino Rack Cargo Carrier, part # RMCB, you referenced, will fit on roofs that have...
  view full answer...
• Locks Compatible with the Demco 5th Wheel Rail Adapter to Factory Ford Pucks
  The Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package - 25,000 lbs # DM6175 does have the pin quick release that are 0.313 x 1.00 inch. Demco doesn't make a specific part for this to lock it but you can use a padlock with compatible diameter shackle for that application. The Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T should work well for your application.
  view full answer...
  
• What to do With Lid When Folding Up the Carpod Walled Cargo Carrier
  The lid of the Carpod Walled Cargo Carrier w/ Lid # M2205-2201 will actually need to be completely removed when you are completely folding it up. You will want to put the lid elsewhere, like inside your vehicle, if you do not need to use the carrier but still have it in the hitch. To mount it to your hitch you can use Pin and Clip # PC3 though I recommend using the Trailer Hitch Receiver Lock # e98880 to lock the Carpod to your and protect your investments. Additionally, if you decide...
  view full answer...
• Install Instructions for the Convert-A-Ball 5th-to-Gooseneck-Adapter # CAB-C5G
  The Installation Instructions for the Convert-A-Ball Cushoined 5th-Wheel-to-Gooseneck Adapter # CAB-C5G says to tighten down the cap screws to approximately 100 ft. lbs. Keep in mind that you will need someone to help hold the adapter while someone else tightens the cap screws since the adapter weighs over 50 lbs. If you are wanting some added security for peace of mind, you can use the Master Lock Padlocks # 141T to help deter theft of your adapter. I have included a demonstration video...
  view full answer...
  
• Recommended Roof Basket and Cargo Bag for 2016 Toyota Highlander
  For a roof basket to mount onto the factory crossbars of your 2016 Toyota Highlander, I highly recommend the Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB. This is a great, heavy-duty steel cargo basket that will provide a weight capacity of 165 pounds. It will fit with the factory crossbars on your Highlander as long as they are no wider than 3-1/2 inches or more than 1-1/2 inches in height. It also needs a crossbar spread (distance between the two crossbars) of 21 to 30 inches. This...
  view full answer...
• Hitch Lock Compatible With Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G
  To lock the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G we have found the Master Lock Padlocks # 141T to be the best option. The Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-55 you found will not fit over the bottom of the coupler. You may be able to use a Hitch Ball # A-6 in the coupler and lock in place. Then you can mount a plate to create a flag holder on the base of the gooseneck hitch.
  view full answer...
• What are the Two Smaller Holes for on the Roadmaster Base Plate Kit # 1528-3
  The smaller holes on the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1528-3 are there to padlock the arms to prevent theft. If you need a padlock, I recommend the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T. I recommend this lock set because it has the vinyl covering that will protect it under your vehicle.
  view full answer...
• Type of Solvent to Apply to Corroded Padlock That Will Not Open
  If a lock has corrosion and will not allow you to turn the inserted key you can try applying a spray solvent like WD40 or PB Blaster inside the key opening. This may be able to dissolve enough of the corrosion to allow the key to turn and open the lock. At that point you can apply more of the solvent to finish removing the corrosive build-up inside it. These solvents can take time to work and they will sometimes need multiple applications before they have finished working on the corrosion....
  view full answer...
• Needed Tools to Install the Convert-A-Ball 5th Wheel to Gooseneck Adapter
  No worries! You don't need specially-shaped sockets to install Convert-A-Ball 5th-Wheel-to-Gooseneck Adapter # CAB-C5G although a torque wrench like # PT87ZR is definitely helpful to make sure you have enough torque. When installing the kingpin, a 3/4" hex bit was used. I attached a screenshot from the video. As for the large square cap screws on the adapter, it helps to tighten down as much as you can with a crescent wrench before torqueing it down to the instructed torque of 100 ft. lbs....
  view full answer...
• Lock Solution for Bulldog BX1 Gooseneck Coupler
  The BX1 series of gooseneck couplers can be locked with a padlock like the part # 141T. When the BX1 couplers are in the coupled position, you can place a padlock through the hole as indicated in the picture. The coupler could then not be opened with or without a trailer connected.
  view full answer...
  
• Can the Offset Convert-A-Ball Be Locked
  Yes. The Offset Convert-a-Ball # CAB-C5GX1216 can be locked using a padlock like the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T. If you've already got some padlocks with 1/4" diameter shackles, you could also use those.
  view full answer...
• Recommended Spare Tire Carrier Compatible with Thule Roof Mounted Cargo Basket
  I have a solution for you, but there isn't one specifically made for the Thule Cargo Basket, so using different clamps may be required to fit the basket rungs properly. I recommend using the Spare Tire Carrier for Yakima Roof Rack Cargo Baskets # Y07076. This carrier has a base that measures 5-3/4 inches by 12 inches and will accommodate spare tires up to 35 inches in diameter. It is also lockable with a 1/4 inch shackle padlock if you desire like # 141T.
  view full answer...
• Will The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter Work With A B&W Gooseneck Hitch
  As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006. I have attached a review...
  view full answer...
• How to Lock Thule Adventurer Cargo Box With Missing Lock Barrels
  Although you have the lock core, you are missing the lock cylinder or barrel assembly it would install into. Unfortunately, Thule doesn't offer this as a replacement part. To be honest, your best bet would be to get a couple of lock hasps like # ML702D and padlocks like # 141T.
  view full answer...
• Is The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter Compatible With A B&W Gooseneck
  As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006.
  view full answer...
• Will the Club Regular Utility Lock Secure My Battery Box Outside My Trailer
  The Club Regular Utility Lock # WIUTL810 may work to secure your battery box on the outside of your trailer. Since this lock has fully extended dimentions of 13-7/8" long x 9-1/8" wide and fully collapsed dimentions of 11" long x 9-1/8" wide, provided that your battery box and the frame can fit inside those dimensions like # 329-HM082BKS, this is an excellent option to secure your box. If your battery box is taller than the # WIUTL810 dimentions will allow, the Club XL Utility Lock # WIUTL800...
  view full answer...
• Availability of 2-Piece Set of Ultra-Fab Wheel Chocks
  We do offer a 2-piece set of Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle Trailers, part # UF21-001070, that works with wheel spacing between 1-1/2- and 5-1/4-inches. If you wish to lock them you can use lock kit # 141T from Master Lock.
  view full answer...
• Recommended Hitch-Mounted Cargo Carrier and Bag for 2017 Ford Explorer
  The etrailer Cargo Carrier # e98874 referenced in your question is a great choice for the 2 inch trailer hitch on your 2017 Ford Explorer. This carrier will provide you with inside/usable dimensions of 60 inches wide, 24 inches deep, and 5-1/2 inches tall. As you mentioned, the carrier can easily fold up toward the rear of your Explorer when not in use. It also tilts away from your vehicle, even when loaded, so you can get to your back doors. I have attached a short video demonstration...
  view full answer...
• Locking Function of the Car Top Cargo Roof Box
  The Car Top Cargo Rooftop Cargo Box - 18 cu ft - Black # CTC-18S does come with a lock and key. It also comes with clips to install around the other clip areas, but for additional security you can add the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T.
  view full answer...

Do you have a question about this Padlock?